RESOURCES
|
Item |
Description/Comments |
| Project Boxes |
Small (1Box) project box Hammond 1551H (2.36"L x 1.38"W) Medium (2Box) clear project box Hammond 1591ATCL (3.9"L x 2.0"W) Large (3Box) project box Hammond 1591XXBSBK (4.48"L x 2.49"W) Large wide (4Box) project box Hammond 1591XXS (4.43"L x 3.33"W) |
| Displays: OLED, LCD |
0.96" 128x64 mono OLED 1.3" 128x64 mono OLED 2.4" colour LCD/TFT/SD display |
| Microcontroller (uC) |
ATMEL ATmega328P uC chip Adafruit QT PY M0 uC module and ATsamD21E18 Adafruit Itsy Bitsy M4 Express uC module and ATsamD51G19A Adafruit Feather M4 Express uC module and ATsamD51J19 |
| uC Pinouts | |
| QWIIC JST SH 4-pin cable |
For connecting IIC devices using the QWIIC
4-wire system - https://www.adafruit.com/product/4209 |
|
BME280 module |
Temperature, humidity, barometric pressure sensor - Adafruit BME280 - AliExpress BME280 |
| microSD module |
3v3 microSD module - Adafruit SPI/SDIO microSD breakout board |
| RGB LED |
Adafruit diffused tri-colour LED, common anode Sparkfun diffused tri-colour LED, common cathode |
| Piezo-electric buzzer |
Sparkfun mini-speaker |
| Button switches |
Tactile momentary-action button switch - Adafruit 6mm |
| LDR light sensor |
Light dependent resistor - Sparkfun mini photocell |
| PIR motion sensor |
Banggood large PIR - 5v supply, 3v3 signal Aliexpress small PIR - 3v3 supply, 3v3 signal. Off-bias of 1v (weird) |
| USB-FTDI module |
Banggood module - supports 3v3 or 5v - these devices are not designed to power your project and will fail over time |
| LiPo battery charger | Adafruit LiPo backpack |
| Libraries | Libraries needed for devices |
|
u8x8 Character Sets: - iconic arrow 2x2 - lucasarts_scumm_subtitle_r_2x2_f |
up-arrow = 0x47 left & right = 0x45 & 0x46 |
